Below are products that we currently have for sale in our inventory.

    AQUBE L Series – LH5, LH7, LH9

    AQUBE® LH5
    Fully automatic standard batch cleaner for assembled PCBs

    The new kolb AQUBE® series offer next-generation cleaning systems – even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

    AQUBE® LH5 is a fully automatic new generation standard PCB fine cleaning system with a capacity of up to 176 (2.8 m²) eurocards per process cycle.

    AQUBE® LH5 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

    The two-tank, three-circuit configuration with ClosedLoop water reprocessing ensures short cycle times and makes this system the perfect economic choice for the precision cleaning of assembled PCBs.


    Highlights

    • Two-tank system with triple circuit function
    • Digital Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing)
    • Fully automatic 4step process: cleaning, (MediumWipe®), rinsing (tap water), DI-water rinsing, VMH®-TurboDigital evaporative drying
    • Process and service intervals PLC controlled
    • Event issuing and software control via high resolution 10″ display with capacitative multi-touch
    • Horizontal PTFE mounted rotor system with up to four asynchronous spray rotors for thorough wetting (no blind spots)
    • Automatic monitoring of ionic residues contamination and gauging of rinse water quality
    • Heater in cleaning tank (A) as a standard feature
    • Exchange for rinse water tank (B / C) and pump out unit as standard features
    • EDGELESS Design and VARIccess® maintenance access: maximum capacity on a very small footprint
    • HT version for high temperature cleaning and rinsing up to 80 °C available

    Little Kolb Logo

    Fully automatic standard batch cleaner for assembled PCBs

    AQUBE® LH5 is a fully automatic new generation standard PCB fine cleaning system with a capacity of up to 176 (2.8 m²) eurocards per process cycle.

    AQUBE® LH5 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

    LH5, LH7, LH9

    PSB500 H90 icons

    Original list price: Clearence price:

    PSE300 2HY

    Highlights

    • Two tank system with triple circuit function
    • Comfortable push-one-button operation
    • Fully automatic 3step (optional up to 5step) process: cleaning, rinsing (tap water), drying with VMH®hot air
    • Vertical twofold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
    • PolyPower®pump-nozzles configuration (three times more pressure power, 30% less cycle time)
    • Short cycle time (< 15 min.), depending on contamination and detergent
    • Coarse filter, sediment filters for both tanks and fine filters for both circuits as standard
    • Closed Loop reprocessing of cleaning and rinsing fluids as standard feature
    • Process and service intervals PLC controlled
    • Event issuing and software control via high resolution 7″ display with capacitive multi-touch
    • PLC data recording and importing by scanner possible
    • All safety relevant devices are standard features in the basic system configuration
    • Extremely compact – very small footprint

    PS3002HY icons

    Little Kolb Logo Optimal cleaning of assembled PCBs (ultra fine cleaning), screens and stencils (fine cleaning) and production tools as solder carriers and solder pallets (maintenance cleaning) today is a prerequisite for reproducible quality as well as for low failure rates, resulting in high customer satisfaction.

    In small and medium-sized companies, however, the volumes of the individual cleaning tasks are not so high, that they justify a payback for individual cleaning systems.

    The German engineered and manufactured kolb PS300 2HY takes this into consideration also for smallest applicable quantities. It is a full hybrid system with Closed Loop water reprocessing that not only cleans screens, stencils and misprints, but can also take on ultra fine and even maintenance cleaning tasks.


    Original list price: Clearence price:

    PSE300 HD

    Highlights

    • Single 75 Liter tank system utilizing time-saving recharging detergent process
    • Easy push-one-button operation
    • Fully automatically looped 2 or 3-step process; cleaning, rinsing, drying with Hot-Speed warm air unit
    • Water free process; no water connection, no waste water disposal necessary
    • Vertical two-fold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
    • Cycle time: < 30 min, depending on level of contamination and detergent used
    • Low-Maintenance Permanent filtration system
    • Closed loop reprocessing of cleaning/rinsing fluid as standard feature
    • PLC Controlled Process and service intervals
    • All safety relevant devices are standard features in the basic system configuration
    • Factory floor space-saving footprint.

     

    Little Kolb LogoCleans screens, stencils, PumpPrints, misprints, carriers.The entry model to safe and efficient fine cleaning: kolb PS300 HD is an extremely compact cleaning system, engineered and manufactured in Germany. Perfect for small and medium businesses with moderate daily cleaning requirements or for large companies with several printers where to each printer a single screen / stencil cleaner is installed

    PS300 HD is a system for optimum cleaning of stencils, misprints and solder carriers, nowadays a prerequisite for reproducible quality and for low failure rates and thus high customer satisfaction.

    PS300 HD icons

    Original list price: Clearence price:

    PSE300 VL

    Highlights

    • Compact system with two tank function
    • Comfortable push-one-button operation
    • Fully automatically looped 4step process: cleaning, MediumWipe®, rinsing, CWA®drying
    • Water free process: no water connection, no waste water disposal necessary
    • Magnetic coupled XPower pumping unit
    • Vertical two-fold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
    • Short cycle time: < 13 min, depending on detergent and contamination
    • Permanent filtration
    • Closed Loop reprocessing of cleaning / rinsing fluid as standard feature
    • PLC controlled processes and service intervals
    • All safety relevant devices are standard features in the basic system configuration
    • Space-saving footprint

    Little Kolb LogoCleans screens, stencils, PumpPrints, misprints, carriers. kolb PS300 VL is an extremely compact first-rate performance PowerSpray® system designed and manufactured in Germany for smaller quantities with very short cycle times due to an intelligent 4step process with patented high performance CWA®supercharger drying.

    PS300 VL icons

    Original list price: Clearence price:

    PSE300 VS

    Highlights

    • Single 75 Liter tank system utilizing time-saving recharging detergent process
    • Easy push-one-button operation
    • Fully automatically looped 2-step process; cleaning, rinsing, CWA supercharger compression drying
    • Water free process; no water connection, no waste water disposal necessary
    • Vertical rotor system with two asynchronous spray rotors for thorough wetting (no blind spots)
    • Short cycle time: < 18 min, depending on level of contamination and detergent used
    • Low-Maintenance Permanent filtration system
    • Closed loop reprocessing of cleaning/rinsing fluid as standard feature
    • PLC Controlled Process and service intervals
    • All safety relevant devices are standard features in the basic system configuration
    • Factory floor space-saving footprint.

    Certified for solar cell production

    Little Kolb LogoCleans screens, stencils, PumpPrints, misprints, carriers kolb PS300 VS is an extremely compact and powerful cleaning system engineered and manufactured in Germany. It is perfectly applicable for smaller quantities with short cycle times due to a dynamic 2step process with patented supercharger compression drying.

    PS300 VS delivers best possible cleaning of stencils, misprints and solder frames, today a prerequisite for  reproducible quality in production, the reduction of expensive production stand-stills and as well for high customer satisfaction.

    PS300 VS icons

    Original list price: Clearence price: