Our Products

WPCL Series

WPCL 330

WPCL water management systems and modules allow for up to four hundredfold reuse of the DI rinsing water (depending on the water quality requirement, which can be freely stored in the software) in the Cross-Loop re-processing process by means of bypass treatment via filter stages and absorbers.

Highlights

  • CrossLoop technology for significant reduction of fresh water use and for waste water disposal
  • Connection to up to three cleaning systems
  • Reuse of pre-rinse and DI-rinse water
  • Recycling of rinse water in DI / DM quality
  • Desired water quality in μS- and corresponding utilization cycles can be freely stored in the software
  • Fully automated process with integrated water exchange / refilling system
  • Two-tank dispenser system with 110 l (tank B) pre-rinse and 220 l (tank C) DI clear-rinse
  • Process and service intervals PLC controlled, monitored and displayed
  • Integrated water exchange system
  • Easy maintenance access through large doors on the left side
  • Easy to install separately or beside the cleaning system
  • System dimensions: W 800 • D 1.000 • H 1.650 mm

WPCL-330_Web

WPCL Series

WPCL 330

WPCL water management systems and modules allow for up to four hundredfold reuse of the DI rinsing water (depending on the water quality requirement, which can be freely stored in the software) in the Cross-Loop re-processing process by means of bypass treatment via filter stages and absorbers.

Highlights

  • CrossLoop technology for significant reduction of fresh water use and for waste water disposal
  • Connection to up to three cleaning systems
  • Reuse of pre-rinse and DI-rinse water
  • Recycling of rinse water in DI / DM quality
  • Desired water quality in μS- and corresponding utilization cycles can be freely stored in the software
  • Fully automated process with integrated water exchange / refilling system
  • Two-tank dispenser system with 110 l (tank B) pre-rinse and 220 l (tank C) DI clear-rinse
  • Process and service intervals PLC controlled, monitored and displayed
  • Integrated water exchange system
  • Easy maintenance access through large doors on the left side
  • Easy to install separately or beside the cleaning system
  • System dimensions: W 800 • D 1.000 • H 1.650 mm

Technical Specification

WPCL330_TI_EN

Product Description

WPCL 330
CrossLoop rinse water recycling system

kolb WPCL 330 is a rinse water recycling system which in a CrossLoop configuration processes heavy metal containing water to extend its usage to up to 400 additional washing processes. Suitable as an extension for up to three cleaning systems with integrated ClosedLoop processing.

Systems for the cleaning of boards (PCBs), screens and stencils or also for maintenance cleaning (solder frames / carriers etc.) have to exchange the water after every single rinsing process or are equipped with an integrated rinsing water filtering cycle, which already allows multiple use of rinse water. The water-saving cleaning systems from kolb have already integrated such a ClosedLoop recycling technology as a standard feature, which already allows a repeated use of the rinse water. The CrossLoop technology of WPCL 330 extends these resource savings of water again by a multiple.

kolb WPCL330 system with CrossLoop crossover recirculation technology and sixfold filtration manages the recycling of wastewater, thus significantly reduces the need for fresh water and the cost for producing DI water as well as for disposal of contaminated used up water.

Corresponding connections can be easily installed on the relevant cleaning system.